General Repair Information
WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Complete the Following Steps before Starting Procedures on the Fuel Supply System:
- Before starting work, place a suction hose near the installation opening for the fuel tank when the exhaust extracting system is switched on.
- This extracts the fuel vapors.
- If no exhaust extracting system is available, a radial fan (as long as motor is not in air flow) with a delivery volume greater than 15 m3 /h can be used.
- Do not let fuel come in contact with skin. Wear fuel-resistant gloves.
- Disable the current to the Transfer Fuel Pump -G6-. Refer to the appropriate Wiring Diagram(s).
- Drain the fuel tank. Refer to FUEL TANK, DRAINING .