Special Tools

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Thrust Pad VW 512
Replacement Stud (8 mm/10 mm) 3114/2
Thrust Pad VW 447 H
Press Piece - Multiple Use VW 412
Tube Split VW 422
Press Plate VW 401
Punch VW 408 A
Tube 28 mm Dia. 100 mm VW 421
Mounting Universal Joint 41-501
Tapered Roller Bearing Puller VAG 1582
Attachment to VAG 1582 V.A.G 1582/4
Attachment to VAG 1582 V.A.G 1582/5
Driving Sleeve 32-111
Punch VW 409
Support Channels VW 457
Sleeve VW 519
Thrust Ring VW 429
Tube 60 mm Dia.VW 415 A
Thrust Tube VW 455
Punch VW 411
Centering Mandrel 12-551
-1- Kukko Extractor 37-46 mm 21/6
-1- Kukko Extractor 14.5-18.5 mm Kukko 21/2
-3- Kukko Separating Tool 22-115 mm 17/2
-3- Kukko Separating Tool 12-75 mm 17/1
-4- Kukko Support 22/1
-4- Puller - Kukko Counterstay 22/2

Fig 1: Identifying Kukko Tools
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Press Plate VW 402

Fig 2: Identifying Thrust Plate VW 402
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Inductive Heat Unit VAS 6414

Fig 3: Identifying Inductive Heater VAS 6414
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Needle Bearing Drift VW 295

Fig 4: Identifying Drift Needle Bearing Drift VW 295
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Adapter VW 295 A

Fig 5: Identifying Needle Bearing Drift VW 295 A
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Thrust Tube VW 454

Fig 6: Identifying Thrust Tube VW 454
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Press Tube 2040

Fig 7: Identifying Press Tube 2040
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 8: Identifying Special Tools -- Input Shaft, Adjusting

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Dial Gauge Holder VW 387
Magnetic Plate 50 mm Dia.VW 385/17
Thrust Pad VW 510
Thrust Pad VW 447 i
Punch VW 407
Torque Wrench 1331 5-50 Nm VAG 1331