Reverse Shaft

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Thrust Tube VW 454
Thrust Pad VW 447 H
Punch VW 411
Centering Mandrel 12-551
Press Plate VW 401
Punch VW 408 A
Kukko Extractor 14.5-18.5 mm Kukko 21/2
Kukko Support 22/1

Fig 1: Identifying Needle Bearing And Clutch Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A -

Counter support, for example, Kukko support 22/1

B -

Internal puller 14.5 to 18.5 mm, for example, Kukko extractor 14.5-18.5 mm 21/2

NOTE:

The needle sleeve will get damaged when it is removed and must be replaced.

Fig 2: Identifying Needle Bearing In Clutch Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 3: Identifying Needle Bearing And Reverse Shaft Support

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 4: Identifying Needle Bearing In Reverse Shaft Support

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.