Special Tools

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Punch VW 408A
Thrust Piece VW 473
Press Support - R&I Wheel Brg's 3144
Thrust Pad 2007
Torque Wrench 1332 40-200 Nm VAG 1332
Thrust Piece T10160
Sleeve 40-21

Fig 1: Identifying Sleeve 40 - 21
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Thrust Piece 40-105

Fig 2: Identifying Thrust Piece 40-105
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Inductive Heat Unit VAS 6414

Fig 3: Identifying Inductive Heater VAS 6414
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 4: Identifying Special Tools -- Right Drive Flange Shaft Oil Seal, Replacing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special Tools And Workshop Equipment Required

Seal Installer - One-Piece Seal T10148
Spindle from Seal Installer-Driver Set 3066
Slide Hammer-Complete Set VW 771
Slide Hammer Set - Hook VW 771/37
Torque Wrench 1331 5-50 Nm VAG 1331

Fig 5: Identifying Special Tools -- Differential, Adjusting

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special Tools And Workshop Equipment Required

Magnetic Plate 50 mm Dia. VW 385/17
Dial Gauge Holder VW 387
Punch VW 407
Thrust Pad 30-205
Torque Wrench 1331 5-50 Nm VAG 1331
-1- Puller - Kukko Internal - 46-56mm 21/7
-4- Puller - Kukko Counterstay 22/2

Fig 6: Identifying Special Tools -- Differential, Disassembling And Assembling

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special Tools And Workshop Equipment Required

Tapered Roller Bearing Puller VAG 1582
Attachment to VAG 1582 VAG 1582/3
Press Piece - Multiple Use VW 412
Press Plate VW 401
Press Plate VW 402