LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (2.0L - Crankshaft Drive - Engine Code(S): CJAA & CVCA (Hatchback)) >> 13 Crankshaft Drive >> Specifications >> Fastener Tightening Specifications >> Flywheel Side Sealing Flange - Tightening Specifications and Sequence

Flywheel Side Sealing Flange - Tightening Specifications and Sequence

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Tightening Sequence
GWWA13-0683Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts in two steps and in the sequence shown:

Stage Bolts Tightening specification
1. -1- through -6- Install all the way in by hand.
2. -1- through -6- Diagonally in steps at least to 15 Nm
scientia non olet · About LEMON Manuals