LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (2.0L - Crankshaft Drive - Engine Code(S): CJAA & CVCA (Hatchback)) >> 13 Crankshaft Drive >> Removal And Installation >> Flywheel >> Installing

Removal And Installation: Flywheel: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE: Replace the dual mass flywheel bolts.

-- Place the Flywheel Retainer 3067 into the hole on the cylinder block -item A-.

Fig 1: Identifying Retainer -3067- Inserted In Hole On Cylinder Block
GWWA13-0051Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals