LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (2.0L - Crankshaft, Cylinder Block - Engine Code: CVCA (Hatchback)) >> 13 Crankshaft, Cylinder Block >> Removal And Installation >> Ribbed Belt TENSIONER >> Installing

Ribbed Belt TENSIONER: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE: Replace the bolts that were tightened with an additional turn after removing them.
scientia non olet · About LEMON Manuals