Vibration Damper: Notes
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Counterhold - Vibration Damper T10355
- Assembly Tool T10531
Individual components of the Assembly Tool T10531:
- Counterhold Tool T10531/1
- Tensioning PinsT10531/2
- Turning Over Tool T10531/3
- Knurled Nut T10531/4
NOTE:
The vibration damper bolt -A- connects the vibration damper -1- timing chain connection -2- and the crankshaft -3-. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described as follows.