LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (1.8L & 2.0L - Crankshaft, Cylinder Block - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 13 Crankshaft, Cylinder Block >> Removal And Installation >> Cylinder Block, Belt Pulley Side >> Crankshaft Seal, Belt Pulley Side >> Removing

Crankshaft Seal, Belt Pulley Side: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Seal Installer - Crankshaft T40274
GWWN13-10592Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the vibration damper, refer to VIBRATION DAMPER .

-- Remove the shaft seal with the Seal Installer - Crankshaft T40274.

scientia non olet · About LEMON Manuals