Crankshaft Seal, Belt Pulley Side: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Seal Installer

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Clean the running and sealing surface.

-- Tighten the shaft seal -arrow- with the Seal Installer - Crankshaft T10354.

-- Install the Press Piece - Timing Chain Cover T10368 and tighten the collar nut -A-.

Fig 2: Identifying Timing Chain Cover Press Piece

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Drive in the seal with Seal Installer - Driveshaft Seal T10182 until stop.

-- Install the vibration damper, refer to VIBRATION DAMPER .