LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (1.8L & 2.0L - Crankshaft, Cylinder Block - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 13 Crankshaft, Cylinder Block >> Removal And Installation >> Crankshaft Needle Bearing >> Installing

Crankshaft Needle Bearing: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Bearing Press Piece
GWWM13-10009Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Drive the needle bearing into the crankshaft using the Bearing Installer - Bearing Press Piece VW 207C.

Installation depth -a- = 2.0 mm.

Fig 2: Identifying Installation Depth
GWWM13-10031Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals