LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (1.8L & 2.0L - Crankshaft, Cylinder Block - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 13 Crankshaft, Cylinder Block >> Removal And Installation >> Balance Shaft >> Balance Shaft, Exhaust Side >> Removing

Balance Shaft, Exhaust Side: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the upper timing chain cover, refer to UPPER TIMING CHAIN COVER .

-- Remove the lower timing chain cover, refer to LOWER TIMING CHAIN COVER .

-- Remove the camshaft timing chain, refer to CAMSHAFT TIMING CHAIN .

-- Remove the balance shaft drive chain, refer to BALANCE SHAFT DRIVE CHAIN .

-- Remove the bolt -1- for the exhaust side balance shaft and remove the balance shaft.

Fig 1: Identifying Intake Camshaft Balance Shaft
GWWA15-10467Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.