LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Anti-Lock Brake System (Hatchback)) >> 45 Anti-Lock Brake System >> Removal And Installation >> ABS Control Module -J104- /ABS Hydraulic Unit -N55- >> ABS Control Module -J104- AND ABS Hydraulic Unit -N55- WITH 4-CYLINDER GASOLINE ENGINE AND ABS MARK 60 EC ABS/EDL/ASR/ESP >> Notes

ABS Control Module -J104- AND ABS Hydraulic Unit -N55- WITH 4-CYLINDER GASOLINE ENGINE AND ABS MARK 60 EC ABS/EDL/ASR/ESP: Notes

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

Fig 1: Identifying Sealing Plug Repair Set, Part No. 1 H0 698 311 A
GWWN45-0039Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install the transportation protection after removing the ABS Hydraulic Unit -N55-.

The warranty on the ABS Hydraulic Unit -N55- will not be honored if there is no transportation protection.

1 -

Transport protection for valve body (foam)

2 -

Sealing plugs M10

3 -

Sealing plugs M12