LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 219 (Brake System - Mechanical Components (Hatchback)) >> 46 Mechanical Components >> Removal And Installation >> Rear Brake Pads >> Brake Pads, Rear Brakes CI 38 >> Installing

Brake Pads, Rear Brakes CI 38: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

The repair kit has 4 self-locking screws for installing the brake caliper. Always use these.

After replacing brake pads, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their normal operating position.

Check brake fluid level after replacing brake pad.

If using the brake pads again, install the marked pads in the same location.