LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (2.0L - Engine Assembly - Engine Code(S): CJAA & CVCA (Hatchback)) >> 10 Engine Assembly >> Specifications >> Fastener Tightening Specifications >> Notes

Fastener Tightening Specifications: Notes

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
Bolts and Nuts
- M5 4.5
M6 10
M7 15
M8 20
M10 40
M12 652
Bracket to Body Bolt1 - 20 + 90°
Bracket to Engine Mount Bolt1 - 20 + 90°
Engine Mount to Body Bolt1 - 40 + 90°
Engine Mount to Engine Mount Bracket Bolt1 - 60 + 90°
Engine Mount Bracket to Engine1 - 40 + 180°
Pendulum Support to Subframe Bolt1 - 100 + 90°
Pendulum Support to Transmission Bolt1 - 50 + 90°
Transmission Mount to Body Bolt1 - 40 + 90°
Transmission Mount to Transmission Mount Bracket1 - 60 + 90°
  • 1 Always replace
  • 2 Tightening specification for M12 collar bolt: 75 Nm