Tightening Specifications

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Mount & Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

= 40 Nm + 90° (¹ /₄ turn) additional turn, replace the bolts
= 20 Nm + 90° (¹ /₄ turn) additional turn, replace the bolts
= 60 Nm + 90° (¹ /₄ turn) additional turn, replace the bolts

Refer to SUBFRAME MOUNT, ADJUSTING .