Engine And Transmission, Separating, Manual Transmission: Procedure

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Console From Transmission, Removal/Installation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Engine/transmission assembly removed and mounted on Engine/Transmission Support T10012.

-- Remove bolts -arrows- and remove the transmission support.

-- Remove the bolts -1- and -2- and then remove the starter from the transmission.

Fig 2: Identifying Starter Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Hook the Engine Sling 2024 A hooks on the transmission lifting eyes.

Fig 3: Identifying Engine Sling - Engine Bracket

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Secure the hook with the securing pin -arrow-.

-- Attach the Workshop Crane VAS 6100 with the Adapter 10 - 222 A /20 to the lifting tackle.

-- Remove the bolts -1, 2, 5, 6, 7 and 8- connecting the transmission to the engine.

Fig 4: Identifying Bolts On Engine/Transmission Flange, Removal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove transmission from engine.