LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Rear Suspension (Hatchback)) >> 42 Rear Suspension >> Removal And Installation >> Wheel Bearing And Trailing Arm >> Trailing Arm With Mounting Bracket >> Determining Installation Position of Mounting Bracket Relative to Trailing Link

Determining Installation Position of Mounting Bracket Relative to Trailing Link

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Dimension -a- : 34 +/- 1 mm.

Fig 1: Installation Position Of Mounting Bracket To Trailing Link
GWWA42-0448Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Bracket
  2. Trailing link

-- When dimension -a- has been adjusted, tighten bolt.

scientia non olet · About LEMON Manuals