Stabilizer Bar: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Insert the stabilizer bar in the vehicle.

-- Tighten the bolts -arrows- for stabilizer clamp uniformly.

Fig 1: Identifying Stabilizer Bar Clip Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the coupling rod -2- in the stabilizer bar and tighten the nut -1-.

Fig 2: Identifying Tie Rod Bolt, Coupling Rod, Nut And Stabilizer Bar

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.