Suspension Strut, Shock Absorber And Spring Overview, Multi-Link Suspension

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Shock Absorber And Coil Spring, Assembly Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Upper Spring Support
Coil Spring
- Note color code.
- Allocation.
- There are different versions of the suspension. Refer to VEHICLE DATA LABEL .
- Surface of spring coil may not be damaged.
- Removing and Installing. Refer to SPRING, MULTI-LINK SUSPENSION .
Low Spring Support
- Spring end rotated up to stop.
Bolt
- 130 Nm +90° turn
Bolt
- 50 Nm + 45° turn
- Replace after removal.
Shock Absorber
- Removing and Installing. Refer to SHOCK ABSORBER, MULTI-LINK SUSPENSION .
- There are different versions of the suspension. Refer to VEHICLE DATA LABEL .
Lower Transverse Link
- Removing and Installing. Refer to LOWER TRANSVERSE LINK .
Wheel Bearing Housing
- Removing and Installing. Refer to WHEEL BEARING HOUSING .