LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (2.0L - Exhaust System - Engine Code(S): CJAA & CVCA (Hatchback)) >> 26 Exhaust System >> Description And Operation >> Emissions Control Overview >> Exhaust System Component Line Routing >> Routing Lines On the Exhaust Flap Control Module

Routing Lines On the Exhaust Flap Control Module

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exhaust System Component Wire Routing
GWWM26-0246Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Reduction Catalytic Converter
  2. NOx Reduction Catalytic Converter
  3. Direction of Travel
  4. Line
    • Pay attention to the installed position.
    • Make sure it is secure
  5. Cable Bracket
  6. Heat Shield
    • Pay attention to the installed position.
    • Replace if damaged
  7. Exhaust flap control module -J883- connector
  8. Exhaust Door Control Unit -J883-
scientia non olet · About LEMON Manuals