LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Glass & Window Regulators (Hatchback)) >> 64 Glass, Window Regulators >> Description And Operation >> Repair Information >> Removing Adhesive

Removing Adhesive

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Use adhesive remover as a cleaning solution. Follow all safety precautions.

WARNING: When cleaning from vehicle interior out, the window just installed must not be pressed outward.

-- Wipe the paint surfaces with a clean cloth. Remove residual adhesive with adhesive remover.

-- Clean the plastic trim: Allow the adhesive sealant to harden (approximately 1 hour) and then peel it off.

scientia non olet · About LEMON Manuals