LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Front Doors & Central Locking System (Hatchback)) >> 57 Front Doors, Central Locking System >> Description And Operation >> Door, Adjusting >> Flush Adjustment

Flush Adjustment

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

The bolts -3- must be loosened in order to adjust the flush dimensions correctly.

For this, the Wrench - Door Adjusting 3320 with the bit insert must be used.

NOTE: Other measures, such as aligning the door upward, do not work. Pressure later will cause the door to sag again.

Striker pin, adjusting, refer to STRIKER PIN, ADJUSTING .

scientia non olet · About LEMON Manuals