LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Front Doors & Central Locking System (Hatchback)) >> 57 Front Doors, Central Locking System >> Description And Operation >> Door, Adjusting >> Adjusting Gap Dimensions

Adjusting Gap Dimensions

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

It is necessary to loosen the bolts -2-, -5- and -6- on the A-pillar in order to adjust the gap dimensions correctly.

-- Remove the A-pillar lower trim to access the bolt -5-, refer to Removal and Installation .

-- To remove the bolt -6-, the instrument panel must be removed, refer to Removal and Installation .

scientia non olet · About LEMON Manuals