LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Front Doors & Central Locking System (Hatchback)) >> 57 Front Doors, Central Locking System >> Description And Operation >> Door Components Overview >> Noise Insulation

Noise Insulation

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Noise Insulation Components
GWWM57-10081Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Foam Piece
    • Clipped to the door
  2. Cover Caps
    • There are different versions. Allocation.
  3. Sticker
    • Use electrical tape if needed
  4. Insulation
    • Self-adhesive
    • Installing:

      -- Cut to size if necessary, 250 mm x 160 mm

      -- Warm and then press firmly onto the outer door panel. Use Hot Air Blower VAG 1416.

  5. Outer Covering
    • Installed depending on the market. Use allocation.
  6. Foam Piece
    • Installing:

      -- Cut to size if necessary, 60 mm x 30 mm

scientia non olet · About LEMON Manuals