Access/Start Authorization System Overview: Starting
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
The ID sensor in ignition key must be located in the vehicle interior. The clutch pedal must pressed on manual transmission vehicles. On vehicles with an automatic transmission and DSG, the selector lever must be in "P" and the brake pedal must be pressed. Press the Start System Button -E378- briefly. This speaks to the ID sensor in the key and if the identification is valid, the steering wheel unlocks and the vehicle can be started.
It is only possible to start the engine with the Start System Button -E378- when a valid ID sensor (inside the key) is located in the vehicle interior.