Passenger Occupant Detection System Control Module: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Attach the Engine/Transmission Holder - Seat Repair Fixture VAS 6136 to the Engine and Transmission Holder VAS 6095.

-- Remove the front seat. Refer to FRONT SEAT .

-- Secure the seat on the Engine/Transmission Holder - Seat Repair Fixture VAS 6136.

Fig 1: Identifying Passenger Occupant Detection System Control Module

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connectors - and 54- from the Passenger Occupant Detection System Control Module -J706- -1-, refer to DISCONNECTING CONNECTOR FROM PASSENGER OCCUPANT DETECTION SYSTEM CONTROL MODULE -J706- .

-- Remove the screw -2-.

-- Remove the Passenger Occupant Detection System Control Module -J706- -1- from the bracket -3- in direction of -arrow-.