Front Passenger Seat Occupied Sensor -G128-: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Attach the Engine/Transmission Holder - Seat Repair Fixture VAS 6136 to the Engine and Transmission Holder VAS 6095.

-- Remove the front seat. Refer to FRONT SEAT .

-- Secure the seat on the Engine/Transmission Holder - Seat Repair Fixture VAS 6136.

-- Remove the front and tunnel side tread for the seat cover from the lower seat frame.

-- Fold up the seat cover along with the seat cushion.

-- Unclip the Front Passenger Seat Occupied Sensor -G128- wiring harness from the seat frame.

-- Remove the 2 clips -2- from the seat frame using the Pry Lever - RMV Outside Mirror 80 - 200.

Fig 1: Identifying Front Passenger Seat Occupied Sensor And Clips

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Front Passenger Seat Occupied Sensor -G128- -1-.

NOTE: For the sake of clarity, the seat cover and seat cushion are not depicted in the figure.