Front Passenger Seat Occupied Sensor -G128-: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Observe installation sequence for the clips:

-- Position the Front Passenger Seat Occupied Sensor -G128- -1- and the clip and secure -2- them.

Fig 1: Identifying Front Passenger Seat Occupied Sensor

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the clip -3- and guide the wiring harness -4- through the lower seat frame.

-- Secure the wiring harness -4- to the lower seat frame -arrow-.

-- Connect the wiring harness to the vehicle electrical system.

Installing of remaining components is reverse of removal.

-- After installation, perform a function check with the ignition on.