LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 207 (Passenger Protection, Airbags & Seat Belts (Hatchback)) >> 69 Passenger Protection, Airbags, Seat Belts >> Removal And Installation >> Driver Side Airbag >> Airbag Unit With Igniter >> Notes

Airbag Unit With Igniter: Notes

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The following describes removing and installing the airbag unit inside a multifunction steering wheel.

The screwdriver mentioned in the following should be about 175 mm long and have a blade width of 7 mm.

WARNING:
  • Follow the General Safety Precautions when working with airbags, belt tensioners and battery cut-out units (pyrotechnic components). Refer to SAFETY PRECAUTIONS .
  • Observe the special information regarding driver and front passenger airbags. Refer to AIRBAG SAFETY PRECAUTIONS .