Connect The Vehicle Diagnostic Tester: Procedure
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical consumers and remove the ignition key.
-- On vehicles with automatic transmissions, move the selector lever to the "P" or "N" position.
-- On vehicles with manual transmissions, move the shift lever to the neutral position.
-- With the ignition switched off, connect the Vehicle Diagnostic Tester to the vehicle diagnostic connection -arrow-.
-- Turn on the ignition.
The method for connecting all Vehicle Diagnostic Tester can be derived from the sequence described above.
Component location and connector assignment for the diagnostic connection, refer to Wiring Diagram.