LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Wiring - General Information (Hatchback)) >> 97 Wiring >> Contact Surfaces, Cleaning >> Contact Surface Cleaning Set VAS 6410 >> Protecting >> Procedure

Contact Surface Cleaning Set VAS 6410: Protecting: Procedure

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Hold the injector under the wiring eyelet and spray all around the pins.

Fig 1: Holding Injector Under Wiring Eyelet
GWWN97-10794Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Hold the injector above the wiring eyelet and spray all around the pins and wiring eyelet.

Fig 2: Holding Injector Above Wiring Eyelet
GWWN97-10795Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.