LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (2.0L - Crankshaft, Cylinder Block - Engine Code(S): CBFA & CCTA (Hatchback)) >> 13 Crankshaft, Cylinder Block >> Specifications >> Fastener Tightening Specifications >> Sealing Flange Bolt Tightening Sequence and Specification

Sealing Flange Bolt Tightening Sequence and Specification

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Sealing Flange Bolt Tightening Sequence
GWWA13-10509Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts in 2 passes in sequence -1 through 8- as follows:

-- 1. Tighten the bolts by hand.

-- 2. Tighten the bolts to 9 Nm.

scientia non olet · About LEMON Manuals