LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (2.0L - Crankshaft, Cylinder Block - Engine Code(S): CBFA & CCTA (Hatchback)) >> 13 Crankshaft, Cylinder Block >> Specifications >> Fastener Tightening Specifications >> Notes

Fastener Tightening Specifications: Notes

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
Air Conditioning Compressor to Accessory Bracket Bolt - 25
Connecting Rod Bearing Cap to Connecting Rod Bolt (1) - 45 + 90°
Dual Mass Flywheel to Crankshaft Bolt (1) - 60 + 90°
Generator to Accessory Bracket Bolt - 23
Pressure Relief Valve to Cylinder Block - 27
Ribbed Belt Tensioner to Accessory Bracket Bolt - 10
Sensor Wheel to Crankshaft Screw (1) - 10 + 90°
Vibration Damper to Crankshaft Bolt (1) - 150 + 90°
(1) : Always replace after removing.
scientia non olet · About LEMON Manuals