LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (2.0L - Crankshaft, Cylinder Block - Engine Code(S): CBFA & CCTA (Hatchback)) >> 13 Crankshaft, Cylinder Block >> Removal And Installation >> Sealing Flange, Transmission Side >> Removing

Sealing Flange, Transmission Side: Removing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Unhook the intermediate plate at the sealing flange and at the alignment bushings -arrows-.

Fig 1: Identifying Intermediate Plate Alignment Bushings
GWWA10-0129Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1 through 8- and remove the transmission side sealing flange.

Fig 2: Identifying Sealing Flange Bolt Tightening Sequence
GWWA13-10509Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals