Ribbed Belt TENSIONER: Notes
WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Mount T40093/5 from the Engine Support Supplement Set T40093
- Moveable Joint T40093/4 from the Engine Support Supplement Set T40093 (quantity: 2)
- Rail with Holes T40091/2 from the Engine Support Basic Set T40091
- Square Pipe T40091/1 from the Engine Support Basic Set T40091 (quantity: 2)
- Moveable Joint T40091/3 from the Engine Support Basic Set T40091 (quantity: 2)
- Engine Support Bridge 10-222 A
- Adapter 10-222 A/28
- Adapter 10 - 222 A/28-1 (quantity: 2)
- Shackle 10-222 A/12
- Bracket with Spindle and Hook 10-222 A/10
- Spindle 10-222 A/11
- Support Bracket 10-222 A/31
- Torque Wrench (5-50 Nm) V.A.G 1331