LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (2.0L - Crankshaft, Cylinder Block - Engine Code(S): CBFA & CCTA (Hatchback)) >> 13 Crankshaft, Cylinder Block >> Removal And Installation >> Flywheel >> Installing

Removal And Installation: Flywheel: Installing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Cylinder block overview, transmission side. Refer to CYLINDER BLOCK OVERVIEW, TRANSMISSION SIDE .

-- Secure with new bolts.

-- Install the flywheel retainer 3067 into the hole in the cylinder block -A-.

Fig 1: Identifying Retainer -3067- Inserted In Hole On Cylinder Block
GWWA13-0051Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.