LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (2.0L - Crankshaft, Cylinder Block - Engine Code(S): CBFA & CCTA (Hatchback)) >> 13 Crankshaft, Cylinder Block >> General Information >> Main Bearing Shell Allocation >> Cylinder Block

Cylinder Block

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Cylinder Block Identification On Oil Pan Sealing Surface
GWWN13-10337Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The identification of the cylinder block may be located either on the oil pan sealing surface or on the top (transmission side) of the cylinder block.

The identification on the cylinder block is for the upper bearing shell.

Fig 2: Locating Cylinder Block Identification On Top (Transmission Side) Of Cylinder Block
GWWN13-10323Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Note the letters and then match them to the color code in the table. Refer to Color Code .