LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (2.0L - Crankshaft, Cylinder Block - Engine Code(S): CBFA & CCTA (Hatchback)) >> 13 Crankshaft, Cylinder Block >> Diagnosis And Testing >> Cylinder Bore, Checking >> Test Sequence

Test Sequence

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Measure diagonally at 3 positions transversely -A- and longitudinally -B-.

NOTE: Measurement of the cylinder bore may not be performed when the cylinder block is mounted on the engine and transmission holder VAS 6095, false measurements are possible.
scientia non olet · About LEMON Manuals