LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (2.0L - Crankshaft, Cylinder Block - Engine Code(S): CBFA & CCTA (Hatchback)) >> 13 Crankshaft, Cylinder Block >> Description And Operation >> Ribbed Belt Drive Overview >> Procedure

Ribbed Belt Drive Overview: Procedure

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Position the accessory bracket and then install the bolts -4-.

-- Tighten the new bolts in three passes in sequence -1 through 5-

-- Tighten the bolts by hand.

-- Tighten the bolts to 20 Nm.

-- Tighten the bolts an additional 90° (1/4) turn.

scientia non olet · About LEMON Manuals