Small Coolant Pipe: Installing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to COOLANT PIPES OVERVIEW .

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-ring.

Only use approved clamps for hose connections.

-- Install the charge air hose. Refer to CHARGE AIR HOSE, DISCONNECTING AND CONNECTING .

-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING .