Engine Coolant Temperature Sensor -G62-: Installing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications:

Coolant pump/thermostat overview. Refer to COOLANT PUMP/THERMOSTAT OVERVIEW .
Intake manifold overview. Refer to INTAKE MANIFOLD OVERVIEW .

Install in the reverse order of removal. Note the following:

NOTE: Replace the O-ring.

-- Clean the O-ring sealing surface.

-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING .