LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (2.0L - Cooling System - Engine Code: CVCA (Hatchback)) >> 19 Cooling System >> Removal And Installation >> Rear Coolant Pipe >> Removing

Rear Coolant Pipe: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation, refer to Overview - Herbie Beetle Decorative Film .

-- Remove the front exhaust pipe, refer to FRONT EXHAUST PIPE .

-- Place the Shop Crane - Drip Tray VAS 6208 underneath.

-- Loosen the clamp -4-, remove the coolant hose, and drain the coolant.

-- Loosen the hose clamps -1- and remove the coolant hoses.

-- Remove the nut -3- and screw -2-. Then remove the rear coolant pipe.

Fig 1: Identifying Clamp, Hose Clamps, Nut And Bolt
GWWA19-11583Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.