Cylinder Head Coolant Valve -N489-: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cylinder Head Coolant Valve - N489- Component Location

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the upper toothed belt guard, refer to TOOTHED BELT GUARD .

-- Disconnect the connector -2- and free up the wire.

-- Remove the bolt -3- and the Cylinder Head Coolant Valve - N489- -1-.