Fastener Tightening Specifications
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
| Components | Fastener Size | Nm |
|---|---|---|
| Toothed belt cover bolt | - | 9 |
| Connecting piece bolt | - | 9 |
| Drive Gear for Toothed Belt bolt1, 2 | - | 10 + 90° |
| Plastic sockets to bracket for After-Run Coolant Pump -V51- bolt | - | 5 |
| Bracket to bracket for After-Run Coolant Pump -V51- nut | - | 9 |
| Bracket connecting After-Run Coolant Pump -V51- to engine bolt | - | 20 |
| Engine Coolant Temperature Sensor on Radiator Outlet -G83- bolt1 | - | 4 + 45° |
| Front coolant pipe bolt | - | 6 |
| Upper coolant pipe bolt | - | 9 |
| Coolant line bolt | - | 9 |
| Condenser bolt | - | 8 |
| Radiator bolt | - | 8 |
| Fan shroud bolt | - | 8 |
| Fan motor to shroud bolt | - | 5 |
| Auxiliary cooler with bracket nut | - | 25 |
|
||