LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (1.8L & 2.0L - Cooling System - Engine Code(S): CPLA, CPPA, CPKA & CPRA (Hatchback)) >> 19 Cooling System >> Removal And Installation >> Fan Shroud >> Removing

Fan Shroud: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bolts -1- from the top.

Fig 1: Fan Shroud Bolts And Electrical Connector
GWWA19-10146Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE: The lower left bolt is under the coolant connector.

-- Remove the noise insulation, refer to Overview - Herbie Beetle Decorative Film .

-- Disconnect the connector -2-.

Fig 2: Fan Shroud Bolts And Electrical Connector
GWWA19-10146Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -3- and remove the fan shroud downward.