LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (1.8L & 2.0L - Cooling System - Engine Code(S): CPLA, CPPA, CPKA & CPRA (Hatchback)) >> 19 Cooling System >> Removal And Installation >> Coolant Pipes >> Removing

Coolant Pipes: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the air filter housing, refer to AIR FILTER HOUSING .

-- Disconnect the coolant hoses -1- and -2- with Hose Clamps up to 25 mm Diameter 3094.

Fig 1: Identifying Coolant Hose Clamps
GWWA19-11612Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the clamps and remove the coolant hoses.

-- Remove the bolts -arrows- and the front coolant pipe.