LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (1.8L & 2.0L - Cooling System - Engine Code(S): CPLA, CPPA, CPKA & CPRA (Hatchback)) >> 19 Cooling System >> Removal And Installation >> Auxiliary Cooler >> Removing

Auxiliary Cooler: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the left front wheel housing liner, refer to REMOVAL AND INSTALLATION .

-- Clamp off both coolant hoses -1- with Hose Clamps - Up To 25 mm 3094 -3-.

Fig 1: Identifying Auxiliary Cooler And Bracket
GWWM19-10051Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Open the spring-type clamps -arrows- to remove both coolant hoses -1- from the auxiliary cooler -2-.

-- Remove nuts -arrows- and auxiliary cooler -1- with bracket -2-.

Fig 2: Identifying Auxiliary Cooler And Bracket
GWWM19-10050Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE: Disengage the air guide from the radiator when removing the auxiliary cooler.