LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (1.8L & 2.0L - Cooling System - Engine Code(S): CPLA, CPPA, CPKA & CPRA (Hatchback)) >> 19 Cooling System >> Description And Operation >> Connection Diagram - Coolant Hoses >> Coolant Hose Connection Diagram, Without Coolant Auxiliary Cooler

Coolant Hose Connection Diagram, Without Coolant Auxiliary Cooler

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Coolant Hose Connection Diagram (Without Coolant Auxiliary Cooler)
GWWM19-10036Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Coolant Reservoir
  2. Coolant Reservoir Cap
  3. Turbocharger
  4. Exhaust Manifold
    • Integrated in cylinder head
  5. Cylinder Head/Cylinder Block
    • Change the coolant after replacing
  6. Heater Core for Heater
    • Change the coolant after replacing
  7. Coolant Pump
  8. Transmission Fluid Cooler
  9. Engine Coolant Temperature Sensor -G62-
  10. Coolant Thermostat Housing
  11. Radiator
    • Change the coolant after replacing
    • Removing and installing, refer to RADIATOR .
  12. Charge Air Cooler
  13. Block Heater
    • Optional equipment level
  14. Engine Coolant Temperature Sensor on Radiator Outlet -G83-
  15. Coolant Recirculation Pump
    • Optional equipment level
  16. After-Run Coolant Pump -V51-