LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (2.0L - Exhaust System & Emission Controls - Engine Code(S): CVCA (Hatchback)) >> 26 Exhaust System, Emission Controls >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Components Fastener Size Nm
Clamping sleeve - 23
Cover nut - 2
Differential pressure sensor dial gauge - 9
Differential pressure sensor dial gauge union nut - 45
EGR motor bolt - 9
Exhaust Gas Temperature Sensor 1 - 45
Exhaust Gas Temperature Sensor 2 - 60
Exhaust Gas Temperature Sensor 3 - 60
Exhaust Gas Temperature Sensor 4 - 60
Filler tube bolt - 11
Front exhaust pipe bracket bolt - 20
Front exhaust pipe screw-type clamp - 7
Rear muffler screw-type clamp bracket bolt - 20
Reducing agent delivery module - 5.75
Reducing agent injector screw type clamp - 5
Reducing agent tank bolts - 25
Retaining loop - 20
Threaded connection on front exhaust pipe - 9
  • 1 For bolt tightening clarification, refer to and see items --
  • 2 For bolt tightening clarification, refer to and see items --
  • 3 For bolt tightening clarification, refer to and see items --
  • 4 For bolt tightening clarification, refer to and see items --
  • 5 For bolt tightening clarification, refer to and see items --
  • 6 For bolt tightening clarification, refer to and see items --
scientia non olet · About LEMON Manuals